- Stock: 1 - 5 Days
- Cat No: CKP1203 3965
- SKU: CKP1203
- UPC: 6009675085606
Tork Craft CKP1203 Corner Round Router Bit 5/16 Inch Radius with 1/4 Inch Shank
At a Glance: 5/16 inch corner round router bit with 1/4 inch shank, tungsten carbide cutting edge and 1/2 inch bearing for smooth rounded woodworking edges.
The Tork Craft CKP1203 Corner Round Router Bit is designed to create smooth, clean and professional rounded edges on timber and suitable woodworking materials. With its 5/16 inch radius, this bit is ideal for softening sharp edges on shelves, furniture components, cabinet work, frames, decorative trims and general woodworking projects.
The bit is manufactured with a tungsten carbide cutting edge for accurate cutting performance, while the 1/4 inch shank fits compatible router collets. The 1/2 inch bearing helps guide the bit along the edge of the workpiece, making it easier to achieve a consistent round-over profile. It is a useful finishing bit for carpenters, craftsmen, hobbyists, DIY users and woodworking workshops.
The CKP1203 forms part of the Tork Craft corner round router bit range and is specifically engineered to provide smooth and accurate cutting. It is ideal for adding a neat 5/16 inch rounded profile to edges where a softer, more refined finish is required.
Product highlights
- 5/16 inch radius Creates a smooth rounded profile on suitable timber and woodworking materials.
- 1/4 inch shank Designed for use with routers fitted with a compatible 1/4 inch collet.
- Tungsten carbide cutting edge Provides clean cutting performance and good wear resistance.
- Bearing guided The 1/2 inch bearing helps guide the router bit along the workpiece edge.
- Clean edge finishing Ideal for furniture, shelving, frames, cabinets, moulding and trim work.
- Woodworking essential Suitable for carpenters, craftsmen, hobbyists, DIY users and woodworking applications.
Definition: The basic edge-forming bit, the corner-rounding bit rounds an edge to a given radius. The tool is shouldered to cut a fillet. The cut can be used to ease edges, as a simple profile, or as a part of a complex one. Also known as roundover, rounding over, and quarter-round. If a smaller pilot bearing is used, a second shoulder can be produced, in effect making the bit a beading bit.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | CKP1203 |
| Barcode | 6009675085606 |
| Product Type | Corner Round Router Bit |
| Product Description | Router Bit Corner Round 5/16 Inch |
| Product Classification | Standard Yellow |
| Radius | 5/16 inch |
| A Dimension | 1-1/8 inch |
| B Dimension | 1/2 inch |
| Shank Diameter | 1/4 inch |
| D Dimension | 32mm |
| Bearing | 1/2 inch |
| Cutting Edge Material | Tungsten Carbide |
| Body & Shank Material | HSS (High Speed Steel) |
| Packaging Type | Hanging Card / Blister |
| Sales Unit | Each |
| Recommended Machine | Router Machine |
| Warranty | 6 Months |
In the box / Packaging:
- 1 x Tork Craft CKP1203 Corner Round Router Bit 5/16 Inch
- Supplied in hanging card / blister packaging
Explaining
the Specifications:
- (d) -> The diameter of the shank or shaft. This size should be the same as the collet size of your router. Example: a small router is mostly supplied with a quarter inch collet that is 6,35 mm inside diameter.
- Common collet sizes:
- 1/4" collet = 6,35mm inside diameter
- 8mm collet = 8mm inside diameter
- 12mm collet = 12mm inside diameter
- 1/2" collet = 12,7mm inside diameter
- NOTE that the 12mm and
the 12,7mm (1/2") sizing are often misunderstood. 1/4 inch is not 6mm but
e
xactly
6,35mm. A 6mm shank will not fit in a 1/4 in collet. Wrong sizes will either
break the collet or the bit will fall out.
- TCT = Tungsten Carbide Tipped
- Allways stay in the MAX Speed range of router bit
