Thin Masonry Cutting Disc 115 x 1.0 x 22.22mm

Safety

• Wear eye, ear and dust protection, including safety glasses with a face shield and suitable respiratory protection for silica-containing masonry dust.
• Use effective dust extraction. Respiratory protection supplements extraction and must fit correctly.
• Wear suitable gloves, protective footwear and fitted work clothing.
• Keep the correct cutting guard and auxiliary handle fitted. Hold the grinder firmly with both hands.
• Never exceed 13,300 rpm. Check the markings on the actual disc before use.
• Do not use damaged or expired discs, enlarge the bore or force the disc onto an unsuitable mounting system.
• Do not grind with the side face, twist the disc in the cut or apply excessive pressure.
• If the disc binds, switch off and hold the grinder still until rotation stops. Correct the cause before continuing.
• Do not restart with the disc inside the workpiece. Allow it to reach operating speed clear of the material before carefully re-entering the cut.
• Keep bystanders clear of flying debris and dust. Check for concealed cables and pipes before cutting walls.
• Do not apply water or coolant unless both the disc and tool are expressly approved for that method.
• Follow the grinder manual and disc markings. Disconnect the power before changing accessories.