2 In 1 Grinding & Cutting Disc 115mm X 2.8 X 0.22 Steel/ss/pva/alu/sto

How to Use

• Check the equipment: Confirm the grinder accepts the disc&s dimensions, mounting arrangement and combination-disc type. Check the speed rating and material markings.
• Disconnect the power: Unplug the grinder or remove its battery before mounting the disc or adjusting accessories.
• Inspect and fit the disc: Reject damaged or expired discs. Install an undamaged disc with the correct flanges and retaining nut according to the grinder manual.
• Prepare for the operation: Fit the appropriate guard and auxiliary handle, secure the workpiece and put on suitable protective equipment.
• Start clear of the workpiece: Hold the grinder with both hands and allow the disc to reach operating speed before making contact.
• Cut: Guide the cutting edge along the marked line with steady pressure. Keep the disc straight and avoid forcing or twisting it.
• Carry out light grinding: Stop the tool and confirm the guard setup is suitable. Restart clear of the workpiece, then use the permitted grinding contact area and approach angle with controlled pressure.
• Finish safely: Switch off and wait until the disc stops completely before putting the grinder down. Allow hot edges to cool before handling.