Edge Bander Ka65 Set

Features

• 1 200 W mains-powered motor: Provides reliable performance for professional edge-banding applications.
• Variable melting temperature: Adjustable temperature range from 100 - 210 °C to suit different adhesive and edging requirements.
• Two feed speeds: Feed speed options of 2 m/min and 4 m/min allow better control for different edging tasks.
• Wide edge height range: Handles edge heights from 18 - 65 mm.
• Edge thickness range: Suitable for edge thicknesses from 0,5 - 3,0 mm.
• Internal radius capability: Suitable for internal radii greater than 50 mm.
• Nozzle system: Designed for clean adhesive application and easier cleaning after use.
• Magazine for edging: Helps hold longer edge bands neatly for better movement and cleaner workflow.
• Additional roller: Provides an added pressure point for tighter radii and awkward areas.
• Systainer³ storage: Supplied in a SYS3 M 337 for practical storage and transport.

Benefits

• Professional finish: Produces clean, consistent edging suitable for furniture, cabinetry and shopfitting work.
• Better workflow: The included accessories support the full process from applying edging to trimming and polishing the finished edge.
• Reduced waste: Adhesive is melted according to the work requirement, helping to avoid unnecessary glue deterioration.
• Flexible edge work: Useful for straight edges, curved elements, shaped parts, radii and free-form components.
• Cleaner handling: The edge magazine helps manage long edging strips during application.
• Improved detail work: The scraper, sanding block, polishing felt and sanding vlies help refine the final edge finish.
• Part of a complete Festool system: Works with Festool adhesives, consumables and compatible stationary edge-banding accessories.

Application

• Affixing wooden edging to panel materials
• Affixing plastic or laminated plastic edging
• Applying melamine edging to furniture panels
• Edging simple rectangular components
• Edging curved, convex and concave shapes
• Edging free-form and rounded elements
• Mobile edge repairs and reworking on site
• Stationary edge banding for small batches when used with compatible table accessories
• Gluing inclined edges from 0 - 47° in stationary use

Extra Information

• The KA 65-Set is part of the Festool CONTURO edge banding system.
• The set is designed for the full edge-banding process: apply, trim, scrape, sand and polish.
• The machine is suitable for variable edge heights and material thicknesses up to 3 mm.
• The cartridge adhesive system helps make adhesive colour changes cleaner and quicker.
• Festool EVA adhesive is available in different colours to better match the board and edging decor.
• The additional roller is useful for narrow radii and difficult areas because it adds another pressure point during application.
• The edge magazine helps manage long edging strips of approximately 150 cm and longer.
• For mitred and small-batch stationary edging, the KA 65 can be used with compatible Festool CONTURO table accessories.

Safety

• Read the operating instructions and safety information before using the machine.
• Wear suitable eye protection when trimming, scraping, sanding or polishing finished edges.
• Use hearing protection where required, especially during extended workshop use.
• Keep hands away from the heated adhesive and nozzle area during operation.
• Allow the machine to cool down properly before cleaning, transport or storage.
• Do not touch melted adhesive, as it can cause burns.
• Keep the workpiece stable and properly supported during edging.
• Use only suitable Festool adhesive cartridges and approved CONTURO accessories.
• Inspect the mains cable before use and do not operate the machine with a damaged cable.
• Disconnect the machine from the power supply before maintenance, cleaning or accessory changes.
• Keep the nozzle system clean to help prevent glue build-up and poor application quality.
• Use care when trimming and scraping edges, as sharp blades and cutters can cause injury.

Specifications

In the box:

• Festool KA 65 CONTURO Edge Bander
• Front handle
• 4 x EVA adhesive, natural
• KSP-KA 65 magazine for holding edging
• 20 x StickFix Granat 80 x 133 P320 abrasive sheets
• ZR-KA 65 additional roll
• HSK 80x133-H sanding block
• KP 65/2 trimming machine
• ZK HW 45/45 scraper
• LAS-STF-KA 65 scratch protector
• PF-STF 80x133 STF H/5 polishing felt
• 80x133 SF 800 VL/5 sanding vlies
• MPA 5010 OR/0,5L polishing agent
• Systainer³ SYS3 M 337