Name: Steel & Stainless Steel Cutting Disc 115 x 3.0 x 22.22mm
Brand: TORK CRAFT
SKU: ABR115S-4
Price: 14.40 ZAR
Availability: InStock

Steel & Stainless Steel Cutting Disc 115 x 3.0 x 22.22mm

Great Value

Steel & Stainless Steel Cutting Disc 115 x 3.0 x 22.22mm

Stock: 1 - 5 Days
Cat No: ABR115S-4 659
SKU: ABR115S-4
UPC: 6009515816346

TORK CRAFT

Product Views: 755

Based on 0 reviews. - Write a review

Don't snooze, this offer ends in:

Day

Hour

Min

Sec

R 14.40

R 20.00

Qty

Add to Cart

Buy Now Ask Question

Add to Wish List Compare this Product

Tork Craft Steel & Stainless Steel Cutting Disc 115 x 3.0 x 22.22 mm

At a Glance: Reinforced abrasive cutting disc for steel and stainless steel, featuring a 115 mm diameter, 3.0 mm thickness and maximum operating speed of 13,300 rpm.

Get your next metalworking project moving with the Tork Craft ABR115S-4 Steel & Stainless Steel Cutting Disc. Manufactured from corundum abrasive and reinforced resin, this 115 mm disc is designed for cutting steel and stainless steel with a compatible angle grinder. Its 3.0 mm thickness suits general metal cutting tasks such as trimming tubing, shortening flat bar and preparing profiles for fabrication or repair. From cutting brackets to sizing components for an assembly, it gives you a practical cutting accessory for workshop and maintenance work. Mark the cutting line, secure the workpiece and use a steady feed to let the abrasive edge work through the material. Always allow for the cutting width and keep the workpiece within your grinder&s cutting capacity.

Dedicated cutting disc for steel and stainless steel

The ABR115S-4 is marked for both steel and stainless steel, also known as INOX. Its A30 SBF specification identifies an aluminium oxide abrasive with a reinforced resin bond. The 3.0 mm profile produces a wider cutting path than thinner cutting discs, so allow for the material removed when measuring components. Use the disc edge for cutting and a separate grinding or finishing accessory for surface work.

Product Highlights

Steel and stainless steel: Suitable for cutting both materials in fabrication and repair applications.
3.0 mm thickness: A cutting profile for general metal cutting work.
115 mm diameter: Suitable for compatible angle grinders designed to accept this disc size.
Reinforced resin construction: Combines corundum abrasive with reinforcement for abrasive cutting.
A30 SBF specification: Abrasive grade clearly marked on the disc.
Marked operating limits: Maximum rotational speed of 13,300 rpm and peripheral speed of 80 m/s.

Compatibility

Angle grinders: Suitable for compatible 115 mm angle grinders that accept a 3.0 mm cutting disc.
Mounting bore: The disc is marked 22.23 mm / 7/8 inch; the product listing uses 22.22 mm. Confirm compatibility with the grinder&s mounting system.
Workpiece materials: Steel and stainless steel sheet, tubing, bar and profiles within the grinder&s cutting capacity.
Guard and flanges: Use the appropriate cutting guard and mounting flanges specified by the grinder manufacturer.
Speed rating: The grinder&s maximum rated speed must not exceed the disc&s maximum permitted speed of 13,300 rpm.

Features

Dual-material suitability: Designed for cutting steel and stainless steel.
3.0 mm cutting section: Provides the stated disc thickness for general cutting applications.
Corundum abrasive: Aluminium oxide abrasive used for cutting the specified metals.
Reinforced resin bond: Holds the abrasive grains within a reinforced disc structure.
Safety standard marking: EN 12413 marked on the disc.

Benefits

Versatile workshop use: One disc specification covers cutting tasks in steel and stainless steel.
Useful for fabrication: Cut material to size before fitting, joining or assembling components.
Practical for repairs: Trim or remove suitable metal sections during maintenance work.
Clear tool selection: Marked dimensions and speed limits help you choose a compatible grinder and mounting arrangement.

Application

Cutting steel and stainless steel tubing.
Shortening flat bar, angle sections and suitable metal profiles.
Cutting steel and stainless steel sheet within the grinder&s capacity.
Preparing brackets and components for fabrication.
Cutting suitable steel threaded rod and fasteners.
Trimming or removing metal components during repairs.

Extra Information

Bore identification: The product name lists a 22.22 mm bore, while the disc marking and detailed specification state 22.23 mm. The disc is also marked 7/8 inch.
Cutting width: Allow for the material removed by the 3.0 mm disc when marking and sizing a workpiece.
Stainless steel work: Reserve a separate disc for stainless steel and use clean workholding equipment to help reduce contamination from previously cut mild steel.
Disc wear: The diameter decreases during use, reducing the available cutting depth.
Storage and condition: Store dry and protected from impact, moisture and excessive heat. Check the disc condition and expiry marking before use.

Cutting use only: A 3.0 mm thickness does not make this a grinding disc. Cut with the edge and avoid side grinding, twisting or lateral pressure.

Pro Tips

Cut on the waste side: Position the disc so the cutting width does not reduce the required finished dimension.
Support the material: Clamp securely and arrange supports so the cut remains open without trapping the disc.
Keep a straight cutting path: Align the disc before entering the material and avoid changing its angle while it is in the cut.
Let the abrasive work: Use steady, moderate pressure instead of forcing the grinder through the material.
Keep stainless steel tools separate: Use a dedicated disc and clean work area for stainless steel projects.
Finish with the right accessory: Let the component cool, then remove burrs and sharp edges with a suitable file or finishing tool.

How to Use

Confirm that the workpiece is steel or stainless steel. Check that the grinder accepts the disc diameter, thickness and bore, and that its maximum rated speed does not exceed 13,300 rpm.
Switch off the grinder and disconnect the power supply or remove its battery before fitting the disc.
Inspect the disc for cracks, chips, distortion and an expired date marking. Mount an undamaged disc using the flanges and tightening procedure specified in the grinder manual.
Fit the appropriate cutting guard and auxiliary handle. Check that the disc is securely mounted and rotates freely without contacting the guard.
Mark and clamp the workpiece. Support it to prevent the cut closing on the disc, and clear people and combustible materials from the spark path.
Wear suitable protective equipment and hold the grinder with both hands. Run it briefly clear of the workpiece as instructed in the tool manual; stop if abnormal vibration or other problems occur.
Allow the disc to reach operating speed, then enter the cut with a steady feed. Maintain straight alignment and avoid twisting, side pressure or excessive force.
Withdraw from the completed cut, switch off and wait for the disc to stop fully before putting the grinder down. Disconnect the power before changing the disc or making adjustments.

Safety

Wear safety glasses, a face shield, hearing protection and suitable respiratory protection for the dust generated.
Wear suitable protective gloves and footwear. Secure loose clothing and long hair, and keep jewellery away from the tool.
Use the correct cutting guard and auxiliary handle, and hold the grinder firmly with both hands.
Never exceed the maximum speed marked on the disc: 13,300 rpm and 80 m/s.
Do not use a cracked, chipped, distorted or expired disc. Do not enlarge the bore or modify the disc.
Use the cutting edge only. Never grind with the sides, twist the disc in the cut or apply lateral pressure.
Clamp and support the workpiece to prevent movement and pinching. Keep hands clear and position your body away from the plane of the rotating disc.
If the disc binds, switch off and hold the tool still until it stops completely. Resolve the cause before continuing; do not restart with the disc trapped in the cut.
Direct sparks away from people, combustible materials and vulnerable surfaces. Keep bystanders clear.
Do not introduce water or coolant unless both the disc and tool manufacturers explicitly approve that use.
Allow cut material to cool before handling and take care around sharp edges.
Wait for the disc to stop fully before putting the grinder down. Disconnect the power before changing accessories, making adjustments or leaving the tool unattended.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	ABR115S-4
Product Type	Abrasive cutting disc for steel and stainless steel
Barcode	6009515816346
Disc Diameter	115 mm
Disc Thickness	3.0 mm
Bore Diameter	22.23 mm marked on the disc; 22.22 mm in the product name
Imperial Size Marking	4 1/2 x 1/8 x 7/8 inch
Abrasive Material	Corundum / aluminium oxide
Bond	Reinforced resin
Abrasive Specification	A30 SBF
Maximum Operating Speed	13,300 rpm
Maximum Peripheral Speed	80 m/s
Suitable Materials	Steel and stainless steel / INOX
Compatible Tool	Suitable 115 mm angle grinder
Intended Operation	Cutting only
Safety Standard Marking	EN 12413

In the Box / Packaging

1 x Tork Craft ABR115S-4 Steel & Stainless Steel Cutting Disc, 115 x 3.0 x 22.22 mm, per unit ordered.

Supplier pack size: 10 discs. This is the supplier ordering pack quantity; each individual unit is one disc.

Tags: Cutting steel , 115mm dia cutting disc , Steel Cutting Disc , Stainless Steel Cutting Disc , INOX Cutting Disc , Metal Cutting Disc , 115mm Cutting Disc , 3.0mm Cutting Disc , Reinforced Cutting Disc , Metal Fabrication , Angle Grinder Accessories